TI1502SA-01 INVERTER ELECTRICAL SPECIFICATION
1. APPLICATION This specification is applied to CCFL inverter unit for 18....
TI1502SA-01 INVERTER ELECTRICAL SPECIFICATION
1. APPLICATION This specification is applied to CCFL inverter unit for 18.5” 2L color LCD backlight. Panel Type：CMO M185B1-L02 Rev.C1 & AUO M185XW01 V.0 & CMO M185B1-L03 Rev.C1 & CPT CLAA185WA02 Weight：31g 2. ELECTRICAL CHARACTERISTICS
NO. Item Symbol Vin Iin Iin Pin Von Voff Vadj Vin= Vin= Vin= 12 V, 12 V, 12 V, Vadj= Vadj= Vadj= 0 -0 V ( 2 Lamp) Condition Min. 11 ----Lamp) --2.4 0 5 Typ. 12 ------------Max. 13 1.5 1.8 19.8 5.0 1.2 0 Unit V A A W V V V 1 Input
Voltage 2 Input Current 3 Inrush Current 4 Input Power 5 Backlight ON/OFF Control 6 Brightness Adjust (Lamp Current Control) 7 Output
Voltage Vout Vin= 12 V, Iout= 7.0 mA ( 1 Lamp) --775 --Vrms
V (Imax) V ( 2
Normal Operation Shutdown Normal Operation
(REF,VALUE) 8 Output Current (Each Connector) Iout(Min) Vin= Ta= Iout(Max) Vin= Ta= 9 Burst Frequency 10 Frequency 11 Lamp Start
Voltage 12 Efficiency 13 Striking time 14 Open Lamp Protection 15 Short Lamp Protection Freq Freq Vopen η Tscp Vin= 12 V, Vadj= 5 V ( 1 Lamp) 2.0 2.5 3.0 mArms
25 ℃, After running 30min. 12 V, Vadj= 0 V ( 1 Lamp) 6.5 7.0 7.5 mArms
25 ℃, After running 30min. --- V , Vadj= --V --50 Ta= 25 ℃ 1350 75 1 Latched Latched --55 --------60 1800 --2 Hz KHz Vrms % Sec
Normal Operation No Load, Vin= 12 V, Vin= Vin= 12 V, 12 V,
Load= PANEL Vadj = 0 V
Note：The lamp start
voltage is tested under one lamp opened Circuit, with a 10cm Hv-wire connected to Hv Probe to simulate lamp wire.
MODEL NAME
TI1502SA-01...
