ACE
ąą
TL16C554, TL16C554I ASYNCHRONOUS COMMUNICATIONS ELEMENT
ą
SLLS165G − JANUARY 1994 − REVISED MARCH 2006
D Integrated...
Description
ąą
TL16C554, TL16C554I ASYNCHRONOUS COMMUNICATIONS ELEMENT
ą
SLLS165G − JANUARY 1994 − REVISED MARCH 2006
D Integrated Asynchronous Communications
Element
D Consists of Four Improved TL16C550 ACEs
Plus Steering Logic
D In FIFO Mode, Each ACE Transmitter and
Receiver Is Buffered With 16-Byte FIFO to Reduce the Number of Interrupts to CPU
D In TL16C450 Mode, Hold and Shift
Registers Eliminate Need for Precise Synchronization Between the CPU and Serial Data
D Up to 16-MHz Clock Rate for up to 1-Mbaud
Operation
D Programmable Baud Rate Generators
Which Allow Division of Any Input Reference Clock by 1 to (216ā −ā 1) and Generate an Internal 16 × Clock
D Adds or Deletes Standard Asynchronous
Communication Bits (Start, Stop, and Parity) to or From the Serial Data Stream
D Independently Controlled Transmit,
Receive, Line Status, and Data Set Interrupts
D Fully Programmable Serial Interface
Characteristics: − 5-, 6-, 7-, or 8-Bit Characters − Even-, Odd-, or No-Parity Bit − 1-, 1 1/2-, or 2-Stop Bit Generation − Baud Generation (DC to 1-Mbit Per
Second)
D False Start Bit Detection D Complete Status Reporting Capabilities D Line Break Generation and Detection D Internal Diagnostic Capabilities:
− Loopback Controls for Communications Link Fault Isolation
− Break, Parity, Overrun, Framing Error Simulation
D Fully Prioritized Interrupt System Controls D Modem Control Functions (CTS, RTS, DSR,
DTR, RI, and DCD)
D 3-State Outputs Provide TTL Drive
Capabilities for Bidirectional Data Bus ...
Similar Datasheet
- TL16C554PN ACE - Texas Instruments
- TL16C554I ACE - Texas Instruments
- TL16C554FN ACE - Texas Instruments
- TL16C554AI ACE - Texas Instruments
- TL16C554A ACE - Texas Instruments