16-Channel FM+ I2C-Bus Constant-Current LED Sink Driver
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
TLC59116-Q1
SLDS223A – MARCH 2...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
TLC59116-Q1
SLDS223A – MARCH 2016 – REVISED MARCH 2016
TLC59116-Q1 16-Channel FM+ I2C-Bus Constant-Current LED Sink Driver
1 Features
16 LED Drivers (Each Output Programmable at Off, On, Programmable LED Brightness, or Programmable Group Dimming and Blinking Mixed With Individual LED Brightness)
16 Constant-Current Output Channels
256-Step (8-Bit) Linear Programmable Brightness Per LED Output Varying From Fully Off (Default) to Maximum Brightness Using a 97-kHz PWM Signal
256-Step Group Brightness Control Allows General Dimming [Using a 190-Hz PWM Signal From Fully Off to Maximum Brightness (Default)]
256-Step Group Blinking With Frequency Programmable From 24-Hz to 10.73 s and Duty Cycle From 0% to 99.6%
Four Hardware Address Pins Allow 14 TLC59116Q1 Devices to Be Connected to Same I2C Bus
Four Software-Programmable I2C Bus Addresses (One LED Group Call Address and Three LED Sub Call Addresses) Allow Groups of Devices to Be Addressed at Same Time in Any Combination
Software Reset Feature (SWRST Call) Allows Device to Be Reset Through I2C Bus
Up to 14 Possible Hardware-Adjustable Individual I2C Bus Addresses Per Device, So That Each Device Can Be Programmed
Open-Load and Overtemperature Detection Mode to Detect Individual LED Errors
Output State Change Programmable on Acknowledge or Stop Command to Update Outputs Byte-by-Byte or All at Same Time (Default to Change ...
Similar Datasheet