Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
TLC59731
SBVS222C – FEBRUARY 2...
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
TLC59731
SBVS222C – FEBRUARY 2013 – REVISED OCTOBER 2016
TLC59731 3-Channel, 8-Bit, PWM LED Driver With Single-Wire Interface (EasySet)
1 Features
1 Three Sink Current Channels Current Capability:
– 50 mA per Channel Grayscale (GS) Control With PWM:
– 8-Bit (256 Steps) With Simple Gamma Correction
Single-Wire Interface (EasySet™) Power-Supply (VCC)
Voltage Range:
– No Internal Shunt Regulator Mode: 3 V to 5.5 V
– Internal Shunt Regulator Mode: 3 V to 6 V OUT Terminals Maximum
Voltage: Up to 21 V Integrated Shunt Regulator Data Transfer Maximum Rate:
– Bits per Second (bps): 600 kbps Internal GS Clock Oscillator: 6 MHz (Typical) Display Repeat Rate: 3.1 kHz (Typical) Output Delay Switching to Prevent Inrush Current Unlimited Device Cascading Operating Temperature: –40°C to 85°C
2 Applications
RGB LED Cluster Lamp Displays
3 Description
The TLC59731 device is an easy-to-use, 3-channel, 50-mA sink current LED driver. The single-wire, 600kbps serial interface (EasySet) provides a solution for minimizing wiring cost. The LED driver provides 8-bit pulse width modulation (PWM) resolution and a simple gamma correction feature. The display repeat rate is achieved at 3.1 kHz (typical) with an integrated 6-MHz grayscale (GS) clock oscillator. The driver also provides unlimited cascading capability.
Output sink current can be set by each external resistor connected to the...