D Direct Upgrades to TL05x, TL07x, and
TL08x BiFET Operational Amplifiers
D Greater Than 2× Bandwidth (10 MHz) and
3× Sl...
D Direct Upgrades to TL05x, TL07x, and
TL08x BiFET Operational
Amplifiers
D Greater Than 2× Bandwidth (10 MHz) and
3× Slew Rate (45 V/μs) Than TL07x
D Ensured Maximum Noise Floor
17 nV/√Hz
TLE207x, TLE207xA EXCALIBUR LOW-NOISE HIGH-SPEED JFET-INPUT OPERATIONAL
AMPLIFIERS
SLOS181C − FEBRUARY 1997 − REVISED DECEMBER 2009
D On-Chip Offset
Voltage Trimming for
Improved DC Performance
D Wider Supply Rails Increase Dynamic
Signal Range to ±19 V
description
The TLE207x series of JFET-input operational
amplifiers more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET operational
amplifiers. Texas Instruments Excalibur process yields a typical noise floor of 11.6 nV/√Hz, 17-nV/√Hz ensured maximum, offering immediate improvement in noise-sensitive circuits designed using the TL07x. The TLE207x also has wider supply
voltage rails, increasing the dynamic signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset
voltage yields precision grades for greater accuracy in dc-coupled applications. The TLE207x are pin-compatible with lower performance BiFET operational
amplifiers for ease in improving performance in existing designs.
BiFET operational
amplifiers offer the inherently higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar
amplifiers. This makes them better suited for interfacing with high-impedance sensors or very low-level ac signals. They also feature inherent...