Photocouplers Photorelay
TLP220G
TLP220G
1. Applications
• Mechanical relay replacements • Security Systems • Measurin...
Photocouplers Photorelay
TLP220G
TLP220G
1. Applications
Mechanical relay replacements Security Systems Measuring Instruments Factory Automation (FA) Amusement Equipment Smart Meters Electricity Meters
2. General
The TLP220G photorelay consists of a photo
MOSFET optically coupled to an infrared LED. It is housed in a 4pin DIP package. It provides an isolation
voltage of 5000 Vrms, making it suitable for applications that require reinforced insulation.
3. Features
(1) Normally open (1-Form-A) (2) OFF-state output terminal
voltage: 350 V (min) (3) Trigger LED current: 2 mA (max) (4) ON-state current: 100 mA (max) (5) ON-state resistance: 35 Ω (max, t < 1s) (6) ON-state resistance: 50 Ω (max, Continuous) (7) Isolation
voltage: 5000 Vrms (min) (8) Safety standards
UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5 (Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory
Note 1: When a VDE approved type is needed, please designate the Option (D4).
©2017-2019 Toshiba Electronic Devices & Storage Corporation
1
Start of commercial production
2011-09
2019-11-21 Rev.6.0
4. Packaging and Pin Configuration
11-5B2S
5. Internal Circuit
TLP220G
1: Anode 2: Cathode 3: Drain 4: Drain
6. Mechanical Parameters
Characteristics
Creepage distances Clearance distances Internal isolation thickness
7.62-mm Pitch TLP220G 7.0 (min) 7.0 (min) 0.4 (min)
10.16-mm Pitch TLP220GF
Unit
8.0 (min)
mm
...