REMOTE TEMPERATURE AND LOCAL TEMPERATURE SENSOR
TMP422-EP
www.ti.com
SBOS577 – SEPTEMBER 2011
±1°C REMOTE TEMPERATURE AND ±2.5°C LOCAL
TEMPERATURE SENSOR IN SOT23-8...
Description
TMP422-EP
www.ti.com
SBOS577 – SEPTEMBER 2011
±1°C REMOTE TEMPERATURE AND ±2.5°C LOCAL
TEMPERATURE SENSOR IN SOT23-8
Check for Samples: TMP422-EP
FEATURES
1
234 SOT23-8 Package ±1°C Remote Diode Sensor (Max) ±2.5°C Local Temperature Sensor (Max) Series Resistance Cancellation n-Factor Correction Two-Wire/ SMBus™ Serial Interface Multiple Interface Addresses Diode Fault Detection RoHS Compliant and NO Sb/Br
APPLICATIONS
Processor/FPGA Temperature Monitoring LCD/ DLP®/LCOS Projectors Servers Central Office Telecom Equipment Storage Area Networks (SAN)
SUPPORTS DEFENSE, AEROSPACE AND MEDICAL APPLICATIONS
Controlled Baseline One Assembly/Test Site One Fabrication Site Available in Military (–55°C to 125°C)
Temperature Range(1) Extended Product Life Cycle Extended Product-Change Notification Product Traceability
+5V
1 DX1
2 DX2
8 V+
7 SCL
6 SDA
SMBus Controller
3 DX3
4 DX4
1 Channel Local 2 Channels Remote
GND 5
(1) Additional temperature ranges available - contact factory
DESCRIPTION
The TMP422 is a remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs.
Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, a...
Similar Datasheet