Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TPA3137D2
SLOS956B – JUNE 2016 – ...
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TPA3137D2
SLOS956B – JUNE 2016 – REVISED DECEMBER 2017
TPA3137D2 6-W Inductor Free Stereo (BTL) Class-D Audio Amplifier with Ultra Low EMI
1 Features
1 2 × 6 W/ch into 6-Ω Loads at 10% THD+N from a 12-V Supply
2 × 6 W/ch into 8-Ω Loads at 10% THD+N from a 13-V Supply
Up to 90% Efficient Class-D Operation (8 Ω) Eliminates Need for Heat Sinks
<0.05% THD+N at 1 W/4 Ω/1 kHz Wide Supply
Voltage Range Allows Operation
from 4.5 V to 14.4 V Inductor-Free Operation Enhanced EMI Performance with Spread
Spectrum SpeakerGuard™ Speaker Protection Includes
Power Limiter and DC Protection Robust Pin-to-Pin, Pin-to-Ground, and Pin-to-
Power Short Circuit Protection and Thermal Protection 26-dB Fixed Gain Single-Ended or Differential Analog Inputs Click and Pop Free Startup
3 Description
The TPA3137D2 device is an efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers at up to 6 W, 6 Ω, or 8 Ω (per channel).
Advanced EMI Suppression Technology with Spread Spectrum Control scheme enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements for system cost reduction. The TPA3137D2 device is not only fully protected against shorts and overload, the SpeakerGuard™ speaker protection circuitry includes a power limiter and a DC detection circuit for protection of the connected speakers. The DC detect and Pin-to-Pin, Pin-to-Gro...