150-mW STEREO AUDIO POWER AMPLIFIER
TPA6110A2
www.ti.com
SLOS314B – DECEMBER 2000 – REVISED MARCH 2011
150-mW STEREO AUDIO POWER AMPLIFIER
Check for Sampl...
Description
TPA6110A2
www.ti.com
SLOS314B – DECEMBER 2000 – REVISED MARCH 2011
150-mW STEREO AUDIO POWER AMPLIFIER
Check for Samples: TPA6110A2
FEATURES
1
2 150 mW Stereo Output PC Power Supply Compatible
– Fully Specified for 3.3 V and 5 V Operation
– Operation to 2.5 V Pop Reduction Circuitry Internal Mid-Rail Generation Thermal and Short-Circuit Protection
Surface-Mount Packaging – PowerPAD™ MSOP
Pin Compatible With LM4881
DGN PACKAGE (TOP VIEW)
BYPASS 1 8 IN1– GND 2 7 VO1
SHUTDOWN 3 6 VDD IN2– 4 5 VO2
DESCRIPTION
The TPA6110A2 is a stereo audio power amplifier packaged in an 8-pin PowerPAD™ MSOP package capable of delivering 150 mW of continuous RMS power per channel into 16-Ω loads. Amplifier gain is externally configured by means of two resistors per input channel and does not require external compensation for settings of 1 to 10.
THD+N when driving a 16-Ω load from 5 V is 0.03% at 1 kHz, and less than 1% across the audio band of 20 Hz to 20 kHz. For 32-Ω loads, the THD+N is reduced to less than 0.02% at 1 kHz, and is less than 1% across the audio band of 20 Hz to 20 kHz. For 10-kΩ loads, the THD+N performance is 0.005% at 1 kHz, and less than 0.5% across the audio band of 20 Hz to 20 kHz.
TYPICAL APPLICATION CIRCUIT
325 kΩ
Audio Input
Ri
Audio Input
Ci C(B)
Ri
Rf 8 IN 1− 1 BYPASS
4 IN 2−
Ci
From Shutdown Control Circuit
3 SHUTDOWN Rf
325 kΩ
VDD/2 − +
VDD 6 VO1 7
− VO2 5 +
Bias Control
2
VDD C(S) C(C)
C(C)
1
Please be aware that an important notice...
Similar Datasheet