TPPM0125 150ĆmA LOW DROPOUT REGULATOR WITH POK
features
D Low Dropout Voltage Regulator, 1.2-V D 150-mA Load Current Ca...
TPPM0125 150ĆmA LOW DROPOUT REGULATOR WITH POK
features
D Low Dropout
Voltage Regulator, 1.2-V D 150-mA Load Current Capability D Power Okay (POK) Function D Load Independent, Low Ground
Current,150-µA
D Current Limiting D Thermal Shutdown D Low Sleep State Current (Off Mode) D Fast Transient Response D Low Variation Due to Load and Line
Regulation
D Output Stable With Low ESR
Capacitors D TTL Logic Controlled Enable Input
SLVS388 − JULY 2001
DBV PACKAGE (TOP VIEW)
VI
1
5
VO
GND 2
EN
3
4
POK
applications
D Processor Powerup Sequencing D Palmtop Computers, Laptops, and
Notebooks
description
The TPPM0125 is a low dropout
voltage regulator with an output tolerance of ±2% over the operating range. The device is optimized for low noise applications and has a low quiescent current (enable <0.8 V). The device has a low dropout
voltage at full load (150 mA). The power okay function monitors the output
voltage and indicates when an error occurs in the system (active low). In the event of an output fault such as overcurrent, thermal shutdown, or dropout, the power okay output is pulled low (open drain).
The TPPM0125 has a fast transient response recovery capability in the event of load transition from heavy load to light load. The device also minimizes overshoot during this condition. During power down, the output capacitor and load are de-energized through the internal active shutdown clamp, which is turned on when the device is disabled.
The TPPM0125 requires a small ou...