www.ti.com
TPS2330 TPS2331
SLVS277G – MARCH 2000 – REVISED JULY 2013
SINGLE HOT-SWAP POWER CONTROLLERS WITH CIRCUIT BR...
www.ti.com
TPS2330 TPS2331
SLVS277G – MARCH 2000 – REVISED JULY 2013
SINGLE HOT-SWAP POWER CONTROLLERS WITH CIRCUIT BREAKER AND POWER-GOOD REPORTING
Check for Samples: TPS2330, TPS2331
FEATURES
1
Single-Channel High-Side
MOSFET Driver Input
Voltage: 3 V to 13 V Output dV/dt Control Limits Inrush Current Circuit-Breaker With Programmable
Overcurrent Threshold and Transient Timer Power-Good Reporting With Transient Filter
CMOS- and TTL-Compatible Enable Input Low 5-μA Standby Supply Current (Max) Available in 14-Pin SOIC and TSSOP Package –40°C to 85°C Ambient Temperature Range Electrostatic Discharge Protection
APPLICATIONS
Hot-Swap/Plug/Dock Power Management Hot-Plug PCI, Device Bay Electronic Circuit Breaker
D OR PW PACKAGE (TOP VIEW)
GATE
1
DGND
2
TIMER
3
VREG
4
VSENSE
5
AGND
6
ISENSE
7
14
DISCH
13
ENABLE
12
PWRGD
11
FAULT
10
ISET
9
AGND
8
IN
NOTE: Terminal 13 is active-high on TPS2331.
typical application
VIN 3 V–13 V
IN VREG
ISET ISENSE GATE
VO +
DISCH
VSENSE
AGND DGND
ENABLE
TPS2330
PWRGD FAULT
TIMER
DESCRIPTION
The TPS2330 and TPS2331 are single-channel hot-swap controllers that use external N-channel
MOSFETs as high-side switches in power applications. Features of these devices, such as overcurrent protection (OCP), inrush-current control, output-power status reporting, and the ability to discriminate between load transients and faults, are critical requirements for hot-swap applications.
The TPS2330/...