www.ti.com
TPS2549-Q1 SLUSCE3C – OCTOBER 2015 – REVISEDTPAUSG2U5S4T92-Q0210
SLUSCE3C – OCTOBER 2015 – REVISED AUGUST 20...
www.ti.com
TPS2549-Q1 SLUSCE3C – OCTOBER 2015 – REVISEDTPAUSG2U5S4T92-Q0210
SLUSCE3C – OCTOBER 2015 – REVISED AUGUST 2020
TPS2549-Q1 Automotive USB Charging Port Controller and Power Switch With
Cable Compensation
1 Features
AEC-Q100 Qualified With the Following Results: – Device HBM ESD Classification Level H2 – Device CDM ESD Classification Level C5
4.5-V to 6.5-V Operating Range 47-mΩ (typ.) High-Side
MOSFET 3.2-A Maximum Continuous Output Current ±5% CS Output for Cable Compensation CDP Mode per USB Battery Charging
Specification 1.2 Automatic DCP Modes Selection:
– Shorted Mode per BC1.2 and YD/T 1591-2009 – 2.7-V Divider 3 Mode – 1.2-V Mode D+ and D– Client Mode for System Update D+ and D– Short-to-VBUS Protection D+ and D– ±8-kV Contact and ±15-kV Air Discharge ESD Rating (IEC 61000-4-2) –40°C to 125°C Junction Operating Temperature 16-Pin QFN (3-mm × 3-mm) Package
2 Applications
Automotive USB Ports (Host and Hubs) Automotive Infotainment System
3 Description
The TPS2549-Q1 device is a USB charging port controller and power switch with a current-sense output that is able to control an upstream supply. This allows it to maintain 5 V at the USB port even with
heavy charging currents. This is important in systems with long USB cables where significant
voltage drops can occur while fast-charging portable devices.
The TP2549-Q1 47-mΩ power switch has two selectable, programmable current limits that support port power management by providin...