TPS40000, TPS40001 TPS40002, TPS40003 TPS40004, TPS40005
SLUS507D − JANUARY 2002 − REVISED NOVEMBER 2005
LOWĆINPUT VOLT...
TPS40000, TPS40001 TPS40002, TPS40003 TPS40004, TPS40005
SLUS507D − JANUARY 2002 − REVISED NOVEMBER 2005
LOWĆINPUT
VOLTAGEĆMODE SYNCHRONOUS BUCK CONTROLLER
FEATURES D Operating Input
Voltage 2.25 V to 5.5 V D Output
Voltage as Low as 0.7 V D 1% Internal 0.7 V Reference D Predictive Gate Drivet N-Channel
MOSFET
Drivers for Higher Efficiency
D Externally Adjustable Soft-Start and
Overcurrent Limit
D Source-Only Current or Source/Sink Current D Versions for Starting Into VOUT Pre-Bias D 10-Lead MSOP PowerPadt Package for
Higher Performance
D Thermal Shutdown D Internal Boostrap Diode D Fixed-Frequency,
Voltage-Mode Control
− TPS40000/1/4 300-kHz − TPS40002/3/5 600-kHz
SIMPLIFIED APPLICATION DIAGRAM
APPLICATIONS
D Networking Equipment D Telecom Equipment D Base Stations D Servers D DSP Power D Power Modules
DESCRIPTION
The TPS4000x are controllers for low-
voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel
MOSFET for the primary buck switch, and an N-channel
MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI’s proprietary Predictive Gate Drivet technology. The reduction in these losses is significant and increases efficiency. For a given converter p...