TPS51211
www.ti.com
SLUSAA7B – NOVEMBER 2010 – REVISED MAY 2013
High-Performance, Single Synchronous Step-Down Control...
TPS51211
www.ti.com
SLUSAA7B – NOVEMBER 2010 – REVISED MAY 2013
High-Performance, Single Synchronous Step-Down Controller For Notebook Power Supply
FEATURES
1
2 Wide Input
Voltage Range: 3 V to 28 V Output
Voltage Range: 0.7 V to 2.6 V Wide Output Load Range: 0 to 20A+ Built-in 0.5% 0.7 V Reference 290-kHz, Adaptive On-Time D-CAP™ MODE
Control 4700 ppm/°C RDS(on) Current Sensing Internal 1-ms
Voltage Servo Soft-start Pre-Charged Start-up Capability Built in Output Discharge Power Good Output Integrated Boost Switch Built-in OVP/UVP/OCP Thermal Shutdown (Non-latch) SON-10 (DSC) Package
APPLICATIONS
Notebook Computers
I/O Supplies
System Power Supplies
DESCRIPTION
The TPS51211 is a small-sized single buck controller with adaptive on-time D-CAP™ mode. The device is suitable for low output
voltage, high current, PC system power rail and similar point-of-load (POL) power supply in digital consumer products. A small package with minimal pin-count saves space on the PCB, while a dedicated EN pin and pre-set frequency minimize design effort required for new designs. The skip-mode at light load condition, strong gate drivers and low-side FET RDS(on) current sensing supports low-loss and high efficiency, over a broad load range. The conversion input
voltage which is the high-side FET drain
voltage ranges from 3 V to 28 V and the output
voltage ranges from 0.7 V to 2.6 V. The device requires an external 5-V supply. The TPS51211 is available in a 10-p...