Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TPS54310
SLVS412F – DECEMBER 2001...
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TPS54310
SLVS412F – DECEMBER 2001 – REVISED APRIL 2019
TPS54310 3-V to 6-V Input, 3-A Output Synchronous-Buck PWM Switcher With Integrated FETs
1 Features
1 60-mΩ
MOSFET switches for high efficiency at 3A continuous output source or sink current
Adjustable output
voltage down to 0.9 V With 1% accuracy
Externally compensated for design flexibility Fast transient response Wide PWM frequency: fixed 350 kHz, 550 kHz, or
adjustable 280 kHz to 700 kHz Load protected by peak current limit and thermal
shutdown Integrated solution reduces board area and total
cost
2 Applications
Low-
voltage, high-density systems with power distributed at 5 V or 3.3 V
Point-of-load regulation for high performance DSPs, FPGAs, ASICs, and microprocessors
Broadband, networking and optical communications infrastructure
Portable computing/notebook PCs
3 Description
As a member of one of TI's families of dc/dc regulators, the TPS54310 low-input-
voltage highoutput-current synchronous-buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance,
voltage error amplifier that provides high performance under transient conditions; an under
voltage-lockout circuit to prevent start-up until the input
voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a power good output useful ...