Typical Size 6,4 mm X 9,7 mm
TPS54610-EP
www.ti.com
SGLS294A – FEBRUARY 2005 – REVISED AUGUST 2007
3 V TO 6 V INPUT,...
Typical Size 6,4 mm X 9,7 mm
TPS54610-EP
www.ti.com
SGLS294A – FEBRUARY 2005 – REVISED AUGUST 2007
3 V TO 6 V INPUT, 6 A OUTPUT SYNCHRONOUS BUCK PWM SWITCHER WITH INTEGRATED FETs (SWIFT™)
FEATURES
1
2 Controlled Baseline
– One Assembly/Test Site, One Fabrication Site
Extended Temperature Performance of –55°C to 125°C
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree (1)
30 mΩ, 12 A Peak
MOSFET Switches for High Efficiency at 6 A Continuous Output Source or Sink Current
Adjustable Output
Voltage Down to 0.9 V With 1% Accuracy
Wide PWM Frequency: Fixed 350 kHz, 550 kHz or Adjustable 280 kHz to 700 kHz
Synchronizable to 700 kHz
Load Protected by Peak Current Limit and Thermal Shutdown
Integrated Solution Reduces Board Area and Component Count
(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
APPLICATIONS
Low-
Voltage, High-Density Distributed Power Systems
Point-of-Load Regulation for HighPerformance DSPs, FPGAs, ASICs, and Microprocessors
Broadband, Ne...