features
D Up to 200-mA Output Current D Less Than 5-mVpp Output Voltage Ripple D No Inductors Required/Low EMI D Regula...
features
D Up to 200-mA Output Current D Less Than 5-mVpp Output
Voltage Ripple D No Inductors Required/Low EMI D Regulated 3.3-V ±4% Output D Only Four External Components Required D Up to 90% Efficiency D 1.8-V to 3.6-V Input
Voltage Range D 50-µA Quiescent Supply Current D 0.05-µA Shutdown Current D Load Isolated in Shutdown D Space-Saving Thermally-Enhanced TSSOP
PowerPAD Package
D Evaluation Module Available
(TPS60100EVM−131)
description
The TPS60100 step-up, regulated charge pump generates a 3.3-V ±4% output
voltage from a 1.8-V to 3.6-V input
voltage (two alkaline, NiCd, or NiMH batteries). Output current is 200 mA from a 2-V input. Only four external
capacitors are needed to build a complete low-noise dc/dc converter. The push-pull operating mode of two single-ended charge pumps assures the low output
voltage ripple as current is continuously transferred to the output. From a 2-V input, the TPS60100 can start into full load with loads as low as 16 Ω.
The TPS60100 features either constant frequency mode to minimize noise and output
voltage ripple or the power-saving pulse-skip mode to extend battery life at light loads. The TPS60100 switching frequency is 300 kHz. The logic shutdown function reduces the supply current to 1-µA (max) and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This dc/dc converter requires no inductors and has low EMI. It is available in the smal...