Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TPS60151
SLVSA02B – SEPTEMBER 200...
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TPS60151
SLVSA02B – SEPTEMBER 2009 – REVISED JANUARY 2019
TPS60151 5-V and 140-mA Charge Pump
1 Features
1 Input
Voltage Range 2.7 V to 5.5 V Fixed Output
Voltage of 5 V Maximum Output Current: 140 mA 1.5-MHz Switching Frequency Typical 90-μA Quiescent Current at No Load
Condition (Skip Mode) Output Reverse Current Protection X2 Charge Pump Hardware Enable and Disable Function Built-in Soft Start Built-in Under
voltage Lockout Protection Thermal and Overcurrent Protection 2-mm × 2-mm 6-Pin SON-Package with 0.8-mm
Height
2 Applications
USB On the Go (OTG) HDMI Portable Communication Devices PCMCIA Cards Mobile Phones, Smart Phones Handheld Meters
Typical Application Schematic
VIN
VOUT (5.0V)
C3 2.2μF
GND
VIN
VOUT
C1 4.7μF
ENA CPCP+
ENABLE /DISABLE
C2 2.2μF
3 Description
The TPS60151 is a switched capacitor
voltage converter which produces a regulated, low noise, and low-ripple output
voltage of 5 V from an unregulated input
voltage. It maintains 5-V regulation even when VIN is greater than 5 V.
The 5-V output can supply a minimum of 140-mA current.
The TPS60151 has built-in current limit and output reverse current protection that are ideal for HDMI, USB OTG and other battery powered applications.
TPS60151 operates in skip mode when the load current falls below 8 mA under typical condition. In skip mode operation, quiescent current is reduced to 90 μA....