TPS7A4501-SP

Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TPS7A4501-SP SLVSC31D – DECEMBER 2013 – REVISED AUGUST 2015 TPS7A4501-SP Low-Dropout Voltage Regulator 1 Features 1 QMLV Qualified SMD 5962-12224 Adjustable Output from 1.21 to 20 V Optimized for Fast-Transient Response High Output Voltage Accuracy: 1.15% at 25°C (Typical) Dropout Voltage: 200 mV With ILOAD = 750 mA (Typical) Low Noise: 50 μVRMS (10 Hz to 100 kHz) for VOUT =5V High Ripple Rejection: 68 dB at 1 kHz 1-mA Quiescent Current No Protection Diodes Needed Stable With Ceramic Output Capacitor Reverse-Battery Protection Reverse Current Protection 5962-1222402VHA: – Wide Vin 2.3 to 20 V – Output Current: 750 mA 5962R1222403VXC: – Wide Vin 2.9 to 20 V – Output Current: 1.5 A – Thermally-Enhanced HKU Package – Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 100 krad (Si) – Exhibits Low Dose Rate Sensitivity But Remains Within the Pre-Radiation Electrical Limits at 100 krad Total Dose Level, as Allowed by MIL-STD-883, TM1019 2 Applications RF Components VCOs, Receivers, ADCs, Amplifiers and Clock Distributions Clean Analog Supply Requirements Available in Military (–55°C to 125°C) Temperature Range Engineering Evaluation (/EM) Samples are Available (1) These units are intended for engineering evaluation only. They are processed to a non-compliant flow (for example, no burn-in, and so forth) and are tested to a temperature rating ...