High-Speed USB 2.0 (480-MBPS) 1:2 Multiplexer/Demultiplexer Switch
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
TS3USB30
SCDS237F – AUGUST 200...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
TS3USB30
SCDS237F – AUGUST 2007 – REVISED AUGUST 2015
TS3USB30 High-Speed USB 2.0 (480-MBPS) 1:2 Multiplexer/Demultiplexer Switch With Single Enable
1 Features
1 VCC Operation at 3 V and 4.3 V 1.8-V Compatible Control-Pin Inputs IOFF Supports Partial Power-Down-Mode
Operation Ron = 10 Ω Maximum ΔRon <0.35 Ω Typical Cio(ON) = 7 pF Typical Low Power Consumption (1 μA Maximum) ESD Performance Tested Per JESD 22
– 6000-V Human Body Model (HBM) (A114-B, Class II)
– 1000-V Charged-Device Model (C101) – 250-V Machine Model (A115-A) –3-dB Bandwidth = 955 MHz Typical Packaged in 10-pin UQFN (1.4 mm × 1.8 mm)
2 Applications
Routes Signals for USB 1.0, 1.1, and 2.0 Mobile Industry Processor Interface (MIPI) Signal
Routing
3 Description
The TS3USB30 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (955 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channelto-channel noise isolation, and i...
Similar Datasheet