TS5V330C
www.ti.com
SCDS276B – APRIL 2009 – REVISED DECEMBER 2009
QUAD SPDT WIDE BANDWIDTH VIDEO SWITCH WITH LOW ON-S...
TS5V330C
www.ti.com
SCDS276B – APRIL 2009 – REVISED DECEMBER 2009
QUAD SPDT WIDE BANDWIDTH VIDEO SWITCH WITH LOW ON-STATE RESISTANCE
Check for Samples: TS5V330C
FEATURES
1
Low Differential Gain and Phase (Typical DG = 0.24%, Typical DP = 0.039°)
Wide Bandwidth (Typical BW > 288 MHz)
Low Cross-Talk (Typical XTALK = –87 dB) Low Power Consumption
(Maximum ICC = 3 μA) Bidirectional Data Flow, With Near-Zero
Propagation Delay
Low ON-State Resistance (Typical rON = 3 Ω) VCC Operating Range From 4.5 V to 5.5 V Ioff Supports Partial-Power-Down Mode
Operation
Data and Control Inputs Provide Undershoot Clamp Diode
Control Inputs Can be Driven by TTL or 5-V/3.3-V
CMOS Outputs
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model (A114-B, Class II)
– 1000-V Charged-Device Model (C101)
Suitable for Both RGB and Composite Video Switching
D, DB, DBQ, OR PW PACKAGE (TOP VIEW)
IN S1A S2A DA S1B S2B DB
GND
1 2 3 4 5 6 7 8
16 VCC
15 EN 14 S1D 13 S2D 12 DD 11 S1C 10 S2C 9 DC
RGY PACKAGE (TOP VIEW)
IN VCC
S1A S2A DA S1B S2B DB
2 3 4 5 6 7
1 8
16
15 EN 14 S1D 13 S2D 12 DD 11 S1C 10 S2C
9
GND DC
DESCRIPTION/ORDERING INFORMATION
The TS5V330C is a 4-bit 1-of-2 multiplexer/demultiplexer video switch with a single switch-enable (EN) input. The select (IN) input controls the data path of the multiplexer/demultiplexer. When EN is low, the switch is enabled and the D port is connected to the S port....