www.vishay.com
TSOP942.., TSOP944..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
1 2 3
16672...
www.vishay.com
TSOP942.., TSOP944..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
1 2 3
16672
LINKS TO ADDITIONAL RESOURCES
Product Page
3D 3D
3D Models
Calculators
Marking
Packages
FEATURES Improved dark sensitivity Improved immunity against optical noise Very low supply current Photo detector and preamplifier in one package Internal filter for PCM frequency Supply
voltage: 2.0 V to 3.6 V Insensitive to supply
voltage ripple and noise Material categorization:
for definitions of compliance please see www.vishay.com/doc?99912
MECHANICAL DATA 1 = OUT, 2 = GND, 3 = VS
Holders
Bends and Cuts
DESCRIPTION
The TSOP94... series devices are the latest generation miniaturized IR receiver modules for infrared remote control systems. These series provide improvements in sensitivity to remote control signals in dark ambient as well as in sensitivity in the presence of optical disturbances e.g. from CFLs.
The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP942.. and TSOP944.., series devices are designed to receive long burst codes (10 or more carrier cycles per burst). The third digit designates the AGC level (AGC2 or AGC4) and the last two digits designate the band-pass frequency (see table below). The higher the AGC, the better noise is suppressed, but the lower the code c...