TUSB501
www.ti.com
SLLSEG5A – AUGUST 2013 – REVISED AUGUST 2013
USB 3.0 Single Channel Redriver with Equalization
Che...
TUSB501
www.ti.com
SLLSEG5A – AUGUST 2013 – REVISED AUGUST 2013
USB 3.0 Single Channel Redriver with Equalization
Check for Samples: TUSB501
FEATURES
1
2 Aggressive Low-Power Architecture (Typ): – 126 mW Active Power – 20 mW in U2/U3 – 3 mW with No Connection
Automatic LFPS DE Control Excellent Jitter and Loss Compensation
– 32 inches of FR4 4 mil Stripline – 3 m of 30 AWG cable Integrated Termination Small 2 x 2 mm QFN Package Selectable Receiver Equalization, Transmitter De-Emphasis and Output Swing Hot-Plug Capable ESD Protection ±5 kV HBM
APPLICATIONS
Cell Phones, Computers, Docking Stations, TVs, Active Cables, Backplanes
EQ DE OS
Termination Termination
Detect
RX+
RXVCC GND
Receiver/ Equalizer
3rd Generation State Machine
Driver
LFPS Controller
TX+ TX-
DESCRIPTION
The TUSB501 is a 3rd generation 3.3-V USB 3.0 single-channel redriver. When 5 Gbps SuperSpeed USB signals travel across a PCB or cable, signal integrity degrades due to loss and inter-symbol interference. The TUSB501 recovers incoming data by applying equalization that compensates channel loss, and drives out signals with a high differential
voltage. This extends the possible channel length, and enables systems to pass USB 3.0 compliance. The TUSB501 advanced state machine makes it transparent to hosts and devices.
After power up, the TUSB501 periodically performs receiver detection on the TX pair. If it detects a SuperSpeed USB receiver, RX termination becomes enabled, and the TUSB5...