DatasheetsPDF.com

UBA2013L Datasheet

Part Number UBA2013L
Manufacturers Philips
Logo Philips
Description HB driver IC
Datasheet UBA2013L DatasheetUBA2013L Datasheet (PDF)

UBA2013/L3 HB driver IC with PFC for fluorescent rings Rev. 00.01 — 23 February 2007 Preliminary data sheet 1. General description The UBA2013/L3 is a high voltage IC intended to drive and control fluorescent lamps. The IC can handle both cold and warm ignition of the lamp. It contains a TON-controlled PFC function, a half bridge controller circuit with level shifter and an internal bootstrap diode to drive an external half bridge. UBA2013/L3 also offers a functionality to properly handle fault.

  UBA2013L   UBA2013L






Part Number UBA2013T
Manufacturers Philips
Logo Philips
Description HB driver IC
Datasheet UBA2013L DatasheetUBA2013T Datasheet (PDF)

UBA2013/L3 HB driver IC with PFC for fluorescent rings Rev. 00.01 — 23 February 2007 Preliminary data sheet 1. General description The UBA2013/L3 is a high voltage IC intended to drive and control fluorescent lamps. The IC can handle both cold and warm ignition of the lamp. It contains a TON-controlled PFC function, a half bridge controller circuit with level shifter and an internal bootstrap diode to drive an external half bridge. UBA2013/L3 also offers a functionality to properly handle fault.

  UBA2013L   UBA2013L







Part Number UBA2013
Manufacturers Philips
Logo Philips
Description HB driver IC
Datasheet UBA2013L DatasheetUBA2013 Datasheet (PDF)

UBA2013/L3 HB driver IC with PFC for fluorescent rings Rev. 00.01 — 23 February 2007 Preliminary data sheet 1. General description The UBA2013/L3 is a high voltage IC intended to drive and control fluorescent lamps. The IC can handle both cold and warm ignition of the lamp. It contains a TON-controlled PFC function, a half bridge controller circuit with level shifter and an internal bootstrap diode to drive an external half bridge. UBA2013/L3 also offers a functionality to properly handle fault.

  UBA2013L   UBA2013L







HB driver IC

UBA2013/L3 HB driver IC with PFC for fluorescent rings Rev. 00.01 — 23 February 2007 Preliminary data sheet 1. General description The UBA2013/L3 is a high voltage IC intended to drive and control fluorescent lamps. The IC can handle both cold and warm ignition of the lamp. It contains a TON-controlled PFC function, a half bridge controller circuit with level shifter and an internal bootstrap diode to drive an external half bridge. UBA2013/L3 also offers a functionality to properly handle fault conditions such as capacitive mode switching, end-of-lamp-life and overcurrent. UBA2013/L3 is designed for wide-input mains voltage (120 V - 277 V) applications. 2. Features 2.1 Half bridge „ „ „ „ „ Suitable for cold and warm ignition Adjustable preheat time Adjustable ignition voltage Integrated bootstrap function Protection for lamp failure and end-of-life „ „ „ „ Adjustable preheat current Single ignition attempt Automatic restart after relamping Protection for capacitive mode 2.2 PFC „ Three pin PFC controller using TON control „ Critical mode operation „ Overvoltage/overcurrent protection 3. Applications The UBA2013/L3 can provide the drive and control function for a wide range of half bridge based ballast applications at different mains voltages. 4. Ordering information Table 1. Ordering information Package Name UBA2013T SO16 Description plastic small outline package; 16 leads; body width 3.9mm Version SOT109-1 Type number Free Datasheet http://www.datasheet4u.com/ 5. Blo.


2013-11-27 : KBP404G    KBP406G    KBP408G    KBP410G    2N5609    MX431    MX440    MX450    MX480    MX485   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)