UNISONIC TECHNOLOGIES CO., LTD UIC809
MICROPROCESSOR RESET CIRCUITS
CMOS IC
DESCRIPTION
The UTC UIC809 series are r...
UNISONIC TECHNOLOGIES CO., LTD UIC809
MICROPROCESSOR RESET CIRCUITS
CMOS IC
DESCRIPTION
The UTC UIC809 series are resetting circuits which can monitor power supplies especially in microprocessor based systems.
In normal operation, the UTC UIC809 series can assert a reset under any of the following situation: the power supply drops below a designated reset threshold level (which is available for 3V or 3.3V or 5V system) is forced low.
There is an internal active low RESET output which has already
been guaranteed to remain asserted for at 140ms least while VCC rises above the designed threshold level.
FEATURES
*
Voltage monitor for 3V or 3.3V or 5V power supplies
* Valid RESET remains with VCC as low as 1V * Typical supply current: 5µA * Fixed 140ms minimum reset pulse width * With Manual reset input
ORDERING INFORMATION
Ordering Number
Package
Pin Assignment 12
UIC809G-x-AE2-3-R
SOT-23-3 RESET
GND
Note: Pin Assignment : x: Output
Voltage, refer to Marking Information.
3 VCC
Packing Tape Reel
www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 8
QW-R119-024.A
UIC809
MARKING INFORMATION
PACKAGE
VOLTAGE CODE
SOT-23-3
B : 2.93V
PIN CONFIGURATION
MARKING
CMOS IC
PIN DESCRIPTION
No. PIN NAME
DESCRIPTION
1
RESET
This pin will fall low after the VCC’s falling below the reset threshold
voltage and it also can remain asserted for at least 140ms min after VCC’s rising upon the reset threshold.
2
GND
Ground
3 VCC Input o...