V23086 series
20 Amp Micro K (Single & Dual) PC Board Relay for Automotive Applications
Features
• 30A, 16VDC switching...
V23086 series
20 Amp Micro K (Single & Dual) PC Board Relay for Automotive Applications
Features
30A, 16VDC switching rating. 40A inrush at 16VDC. 20A continuous contact rating @ 85°C. Immersion cleanable plastic case with knock-off nib for ventilation. 60% less volume than other comparable power relays. 1 Form A and 1 Form C arrangements in single and dual relay packages. Choice of AgNi 0.15 or AgSnO contacts.
Operate Data
Must Operate and Must Release
Voltage: See Coil Data table. Initial Operate Time: 3 milliseconds, typical, with rated coil
voltage
applied. Initial Release Time: 1.5 milliseconds, typical, with zero volts applied (for
unsuppressed relays after having been energized at rated coil
voltage.)
Conditions
All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, 29.5 ± 1.0" Hg.) unless otherwise noted.
Contact Data
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT) in single relay and dual relay configurations.
Material: AgNi 0.15 - Recommended for inductive loads. AgSnO - Recommended for high inrush, lamp and capacitive loads and applications prone to contact material transfer.
Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load.
Max. Load Current (@ 14VDC Load
Voltage):
Load
Form A (NO)
Form C NO NC
Max. Continuous Current Max. Break Current Max. Make Current
AgSnO AgNi 0.15
30A ...