Single Relays. V23086-C1001-A602 Datasheet

V23086-C1001-A602 Datasheet PDF


Part Number

V23086-C1001-A602

Description

Single Relays

Manufacture

Tyco

Total Page 5 Pages
Datasheet
Download V23086-C1001-A602 Datasheet


V23086-C1001-A602
PCB Relays
Single Relays
Micro Relay K
Catalog 1308028
Revision 03-06
Revision 03-05
Description
Features
- Smallest power relay
- Minimal weight
(0.14 oz. / 4 g)
- Maximum continuous current
30 A
Typical applications
- Rear window and seat
heating
- Wiper and indicator control
- Motor management
Please contact Tyco Electronics
for relay application support.
Powertrain
Systems
Chassis
Systems
Safety
Security
Body
Driver
Convenience
Information
Car Industry
Truck
Industry
Design
Sealed;
sealed version:
sealing in accordance
with IEC 68;
immersion cleanable:
protection class IP67 to
IEC 529 (EN 60 529)
Weight
Approx. 0.14 oz. (4 g)
Nominal voltage
10 V, 12 V
other nominal voltages on request
Terminals
PCB terminals, for assembling
in printed circuit boards
Conditions
All parametric, environmental and
endurance tests are performed
according to EIA Standard RS-407-A
at standard test conditions unless
otherwise noted:
23 °C ambient temperature,
20-50% RH, 29.5 ± 1.0" Hg
(998.9 ±33.9 hPa).
Please also refer to the Application
Recommendations in this catalog
for general precautions.
86_3d08
Other
Industry
Disclaimer
All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of
the relay for your intended purpose. We do not assume any responsibility or liability for not complying herewith. We recommend to complete our questionnaire and
to request our technical service. Any responsibility for the application of the product remains with the customer only. All specifications are subject to change without
notification. All rights of Tyco are reserved.
106
Please observe the disclaimer.

V23086-C1001-A602
PCB Relays
Single Relays
Micro Relay K
Dimensional drawing
2.5 ± 0.2
0.6 ± 0.2
**
** Epoxy height at terminals
max. 0.7 mm
12.0 ± 0.1
5.8 ± 0.1
Nipp-off-pin
The nipp-off-pin may
be removed after sol-
dering and washing
(for ventilation)
A
12.9 ± 0.2
0.95 ± 0.2
Tyco86etw_se
View of the terminals (Bottom view)
C
B
*) Additional tin tops
max. 1 mm
8.5
7.5
0.5
1.72
34
51
5x
0.4
0.3
2
5x
A B 0.4
A 0.3
AC
A
Remark: Positional tolerances according to DIN EN ISO 5458
Tyco86etw_an
Catalog 1308028
Revision 03-06
Revision 03-05
Please observe the disclaimer.
107





@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)