Product Data Sheet
PRELIMINARY
VS-502
Voltage Controlled SAW Oscillator
Features
• Output frequencies from 300 MHz to...
Product Data Sheet
PRELIMINARY
VS-502
Voltage Controlled SAW Oscillator
Features
Output frequencies from 300 MHz to 1350 MHz Ultra low jitter < 0.2 ps-rms (12 kHz to 20 MHz) < 0.2 ps-rms (50 kHz to 80 MHz) Low phase noise, -160 dBc/Hz @ 1 MHz offset (1 GHz) Small low profile 9.0 * 14.0 * 4.5 mm SMT package 3.3 V, 5.0 V and 12V Supply Options LV-PECL, PECL, or Sinewave (0 to +10 dBm into 50 Ώ)
www.DataSheet4U.com
Output disable feature (For LVPECL - PECL option) Product is free of lead and compliant to EC RoHS Directive
Applications
Point to Point / Point to Multi Point Radios Instrumentation PLL Frequency Translation Test & Measurement Military & Avionics
Description
The VS-502 is a SAW based
voltage controlled oscillator that operates at the fundamental frequency of the internal SAW resonator. This direct approach enables this series to achieve low phase noise and jitter performance at high output frequencies and over wide operating temperature range. The oscillator is housed in a hermetically sealed J-lead surface mount package offered on tape and reel. As an option, it has an output disable to facilitate on-board test
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 1
Tel: 1-88-VECTRON-1 Website: www.vectron.com Rev: 27January06
VS-502
Voltage Controlled SAW Oscillator
Table 1. Electrical Performance
Parameter Symbol Minimum FN APR 300 ± 50 Typical Maximum 1350 ± 20 ± 10 ± 10 + 350 ± 200 VCC VCC VCC ICC PO PO PO PO 11.4 4.75 3.135...