LED. WP710A10QBC-G Datasheet

WP710A10QBC-G Datasheet PDF

Part WP710A10QBC-G
Description SMD LED
Feature ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z Low .
Manufacture Kingbright
Datasheet
Download WP710A10QBC-G Datasheet

ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DIS WP710A10QBC-G Datasheet





WP710A10QBC-G
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z Low power consumption.
z Popular T-1 diameter package.
z General purpose leads.
z Reliable and rugged.
z Long life - solid state reliability.
z Available on tape and reel.
z RoHS compliant.
Package Dimensions
T-1 (3mm) SOLID STATE LAMP
Part Number: WP710A10QBC/G
Blue
Descriptions
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAL0522
APPROVED: WYNEC
REV NO: V.4B
CHECKED: Allen Liu
DATE: AUG/28/2014
DRAWN: Y.Liu
PAGE: 1 OF 6
ERP: 1101029215



WP710A10QBC-G
Selection Guide
Part No.
Dice
Lens Type
WP710A10QBC/G
Blue (InGaN)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 20mA
Min. Typ.
1400 2800
Viewing
Angle [1]
2θ1/2
20°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Blue
461
nm
IF=20mA
λD [1]
Dominant Wavelength
Blue
465
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Blue
25
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
3.3
4
V
IF=20mA
IR
Reverse Current
Blue
50
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAL0522
APPROVED: WYNEC
REV NO: V.4B
CHECKED: Allen Liu
Blue
120
30
150
5
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
DATE: AUG/28/2014
DRAWN: Y.Liu
Units
mW
mA
mA
V
PAGE: 2 OF 6
ERP: 1101029215




@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)