SOLID STATE LAMP
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
Features
z Low pow...
Description
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
Features
z Low power consumption. z Popular T-1 3/4 diameter package. z General purpose leads. z Reliable and rugged. z Long life - solid state reliability. z Available on tape and reel. z RoHS compliant.
T-1 3/4 (5mm) SOLID STATE LAMP
Part Number: WP7113PBC/Z
Blue
Description
The Blue source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.
Package Dimensions
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.
SPEC NO: DSAG9882 APPROVED: WYNEC
REV NO: V.4 CHECKED: Allen Liu
DATE: JAN/05/2009 DRAWN: Y.F.Lu
PAGE: 1 OF 6 ERP: 1101020961
Selection Guide
Part No.
Dice
Lens Type
WP7113PBC/Z
Blue (InGaN)
WATER CLEAR
Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%.
Iv (mcd) [2] Viewing
@ 20mA
Angle [1]
Min. Typ. 2θ1/2
2500 5500
20°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
...
Similar Datasheet