DATASHEET
X9314
Terminal Voltages ±5V, 32 Taps, Log Taper Single Digitally Controlled Potentiometer (XDCP™)
FN8178 Rev...
DATASHEET
X9314
Terminal
Voltages ±5V, 32 Taps, Log Taper Single Digitally Controlled Potentiometer (XDCP™)
FN8178 Rev 3.00 July 24, 2014
The Intersil X9314 is a solid state nonvolatile potentiometer and is ideal for digitally controlled resistance trimming.
The X9314 is a resistor array composed of 31 resistive elements. Between each element and at either end are tap points accessible to the wiper element. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation.
The XDCP can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing.
Block Diagram
Features
Solid State Potentiometer 32 Taps 10kEnd to End Resistance Three-Wire Up/Down Serial Interface Wiper Resistance, 40Typical Nonvolatile Storage and Recall on Power-up of Wiper
Position Standby Current < 500µA Max (Total Package) VCC = 3V to 5.5V Operation 100 Year Data Retention Offered in 8 Ld MSOP and SOIC Packages Pb-Free Plus Anneal Available (RoHS Compliant)
U/D INC CS
VCC VSS
5-Bit UP/DOWN COUNTER
5-Bit NONVOLATILE
MEMORY
STORE AND RECALL
CONTROL CIRCUITRY
31 30
29
28 ONE OF THIRTY-TWO DECODER
2 1
0
VH/RH
TRANSFER GATES
RESISTOR ARRAY
VL/RL VW/RW
FN8178 Rev 3.00 July 24, 2014
Page 1 of 8
X9314
Ordering Information
PART ...