DATASHEET
X93256
Dual Digitally Controlled Potentiometers (XDCPs™)
The Intersil X93256 is a dual digitally controlled ...
DATASHEET
X93256
Dual Digitally Controlled Potentiometers (XDCPs™)
The Intersil X93256 is a dual digitally controlled potentiometer (XDCP). The device consists of two resistor arrays, wiper switches, a control section, and nonvolatile memory. The wiper positions are controlled by individual Up/Down interfaces.
A potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. The position of each wiper element is controlled by a set of independent CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation.
Each potentiometer is connected as a three-terminal variable resistor and can be used in a wide variety of applications including:
Bias and Gain Control
LCD Contrast Adjustment
Pinout
X93256 (14 LD TSSOP)
TOP VIEW
Rw1 RL1
1 2
14 13
CS1 3
12
INC2
4
11
U/D2
5
10
RH2 VSS
6 7
9 8
*NC can be left unconnected, or connected to any
voltage between VSS and VCC.
RH1
U/D1 INC1 VCC
CS2 RL2 Rw2
FN8188 Rev 2.00 February 1, 2008
Features
Dual solid-state potentiometers
Individual Up/Down interfaces
32 wiper tap points per potentiometer - Wiper position stored in nonvolatile memory and recalled on power-up
31 resistive elements per potentiometer - Temperature compensated - Maximum resistance tolerance of ±25% - Terminal
voltage, 0 to VCC
Low power
CMOS - VCC = 2.7V to 5.5V. - Active current, 200µA typical per potentiom...