DatasheetsPDF.com

X9400 Datasheet

Part Number X9400
Manufacturers Renesas
Logo Renesas
Description Quad Digitally Potentiometer
Datasheet X9400 DatasheetX9400 Datasheet (PDF)

DATASHEET X9400 Low Noise/Low Power/SPI Bus Quad Digitally Controlled Potentiometers (XDCP™) FN8189 Rev 4.00 September 2, 2015 FEATURES • Four potentiometers per package • 64 resistor taps • SPI serial interface for write, read, and transfer operations of the potentiometer • Wiper resistance, 40 typical at 5V. • Four non-volatile data registers for each potentiometer • Non-volatile storage of multiple wiper position • Power-on recall. Loads saved wiper position on power-up. • Stan.

  X9400   X9400






Part Number X9409
Manufacturers Intersil Corporation
Logo Intersil Corporation
Description Quad Digitally Controlled Potentiometers
Datasheet X9400 DatasheetX9409 Datasheet (PDF)

OBSOLETE PRODUCT DATASHEET NO RECOMMENDED REPLACEMENT contact our Technical Support Center at X9409 1-888-INTERSIL or www.intersil.com/tsc FN8192 Low Noise/Low Power/2-Wire Bus Quad Digitally Controlled Potentiometers Rev.6.00 (XDCP) Sep 3, 2015 The X9409 integrates 4 digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated microcircuit. The digitally controlled potentiometer is implemented using 63 resistive elements in a series array. Between each element are tap p.

  X9400   X9400







Part Number X9408
Manufacturers Renesas
Logo Renesas
Description Quad Digitally Potentiometer
Datasheet X9400 DatasheetX9408 Datasheet (PDF)

DATASHEET X9408 Low Noise/Low Power/2-Wire Bus Quad Digitally Controlled (XDCP™) Potentiometers FN8191 Rev.4.00 January 15, 2009 Description The X9408 integrates four digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated circuit. The digital controlled potentiometer is implemented using 63 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the u.

  X9400   X9400







Part Number X9401
Manufacturers Renesas
Logo Renesas
Description Quad Digitally Potentiometer
Datasheet X9400 DatasheetX9401 Datasheet (PDF)

DATASHEET X9401 Low Noise/Low Power/SPI Bus Quad, 64 Tap, Digitally Controlled Potentiometer (XDCP™) FN8190 Rev 5.00 September 14, 2015 Description The X9401 integrates 4 digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated microcircuit. The digitally controlled potentiometer is implemented using 64 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controll.

  X9400   X9400







Quad Digitally Potentiometer

DATASHEET X9400 Low Noise/Low Power/SPI Bus Quad Digitally Controlled Potentiometers (XDCP™) FN8189 Rev 4.00 September 2, 2015 FEATURES • Four potentiometers per package • 64 resistor taps • SPI serial interface for write, read, and transfer operations of the potentiometer • Wiper resistance, 40 typical at 5V. • Four non-volatile data registers for each potentiometer • Non-volatile storage of multiple wiper position • Power-on recall. Loads saved wiper position on power-up. • Standby current < 1µA max • • System Analog VV+C/VC:–:2-.57VV to to 5.5V +5V operation • 10k, 2.5k end to end resistance • 100 yr. data retention • Endurance: 100,000 data changes per bit per register • Low power CMOS • 24 Ld SOIC and 24 Ld TSSOP • Pb-free plus anneal available (RoHS compliant) DESCRIPTION The X9400 integrates four digitally controlled potentiometers (XDCPs) on a monolithic CMOS integrated circuit. The digitally controlled potentiometer is implemented using 63 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the SPI serial bus interface. Each potentiometer has associated with it a volatile Wiper Counter Register (WCR) and four nonvolatile Data Registers (DR0-3) that can be directly written to and read by the user. The contents of the WCR controls the position of the wiper on the resistor array through the switch.


2020-06-03 : X9511    X9520    CD22M3494    X9421    X9418    X9401    X93256    X93155    X9315    X9258   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)