E3/DS3/STS-1 LINE INTERFACE UNIT
www.DataSheet4U.com
XRT75VL00D
E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
REV. 1.0.3
FEBRUARY 2004
GE...
Description
www.DataSheet4U.com
XRT75VL00D
E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
REV. 1.0.3
FEBRUARY 2004
GENERAL DESCRIPTION
The XRT75VL00D is a single-channel fully integrated Line Interface Unit (LIU) with Sonet Desynchronizer for E3/DS3/STS-1 applications. It incorporates an independent Receiver, Transmitter and Jitter Attenuator in a single 52 pin TQFP package. The XRT75VL00D can be configured to operate in either E3 (34.368 MHz), DS3 (44.736 MHz) or STS-1 (51.84 MHz) modes. The transmitter can be turned off (tri-stated) for redundancy support and for conserving power. The XRT75VL00D’s differential receiver provides high noise interference margin and is able to receive the data over 1000 feet of cable or with up to 12 dB of cable attenuation. The XRT75VL00D incorporates an advanced crystalless jitter attenuator that can be selected either in the transmit or receive path. The jitter attenuator performance meets the ETSI TBR-24 and Bellcore GR-499 specifications. Also, the jitter attenuator can be used for clock smoothing in SONET STS-1 to DS3 de-mapping. The XRT75VL00D provides both Serial Microprocessor Interface as well as Hardware mode for programming and control. The XRT75VL00D supports local, remote and digital loop-backs. The XRT75VL00D also contains an onboard Pseudo Random Binary Sequence (PRBS) generator and detector with the ability to insert and detect single bit error.
On-chip clock synthesizer provides the appropriate
rate clock from a single 1...
Similar Datasheet