OVERVOLTAGE AND OVERCURRENT PROTECTION IC AND Li+ CHARGER FRONT-END PROTECTION IC
bq24313 bq24315
www.ti.com................................................................................................
bq24313 bq24315
www.ti.com............................................................................................................................................... SLUS817A – MARCH 2008 – REVISED NOVEMBER 2008
OVER
VOLTAGE AND OVERCURRENT PROTECTION IC AND Li+ CHARGER FRONT-END PROTECTION IC
FEATURES
1
23 Provides Protection for Three Variables: – Input Over
voltage, with Rapid Response in < 1 µs – User-Programmable Overcurrent with Current Limiting
– Battery Over
voltage 30V Maximum Input
Voltage Supports up to 1.5A Input Current Robust Against False Triggering Due to
Current Transients Thermal Shutdown Enable Input Status Indication – Fault Condition
5.5V LDO Mode
Voltage Regulation Available in Space-Saving Small 8 Lead 2mm
×2mm SON
APPLICATIONS
Mobile Phones and Smart Phones PDAs MP3 Players Low-Power Handheld Devices Bluetooth™ Headsets
DESCRIPTION
The bq24313 and bq24315 are highly integrated circuits designed to provide protection to Li-ion batteries from failures of the charging circuit. The IC continuously monitors the input
voltage, the input current, and the battery
voltage. The output acts as a linear regulator. The output is regulated to VO(REG) for inputs between VO(REG) and the over
voltage threshold. If an input over
voltage condition occurs, the IC immediately removes power from the charging circuit by turning off an internal switch. In the case of an overcurrent condition, it limits the system current at the threshold value, a...