bq24350 bq24352
www.ti.com.................................................................................................
bq24350 bq24352
www.ti.com............................................................................................................................................................... SLUS943A – MAY 2009 – REVISED JUNE 2009
Over-
Voltage and Over-Current Charger Front-end Protection IC With Integrated Charging FET
Check for Samples: bq24350 bq24352
FEATURES
1
2 Robust Protection – Input Over-
Voltage Protection – Input Over-Current Protection – Accurate Battery Over-
Voltage Protection – Thermal Shutdown – Output Short-Circuit Protection
Integrated Charging FET LDO Mode Operation Current Limited Power Supply for Host
Controller
Soft-Start to Prevent Inrush Currents Soft-Stop to Prevent
Voltage Spikes 30V Maximum Input
Voltage Supports Up to 1A Load Current Small 2mm × 2mm 8pin SON Package
APPLICATIONS
Mobile Phones Low-Power Handheld Devices
DESCRIPTION
The bq24350/2 is a highly integrated circuit designed to provide protection to Li-ion batteries from failures of the charging circuit. The IC continuously monitors the input
voltage and the battery
voltage. In case of an input over-
voltage condition, the IC will turn off the internal power FET after a blanking time. If the battery
voltage rises to unsafe levels during charging process, power is removed from the system. If the input current exceeds the over current threshold for a limited time, the IC will turn off the output power. The integrated charging FET can regulate the charge
voltage and current a...