bq24750

bq24750 www.ti.com............................................................................................................................................... SLUS735D – DECEMBER 2006 – REVISED MARCH 2009 Host-Controlled Multi-Chemistry Battery Charger With Integrated System Power Selector and AC Overpower Protection FEATURES 1 NMOS-NMOS Synchronous Buck Converter with 300 kHz Frequency and >95% Efficiency 30-ns Minimum Driver Dead-time and 99.5% Maximum Effective Duty Cycle High-Accuracy Voltage and Current Regulation – ±0.5% Charge Voltage Accuracy – ±3% Charge Current Accuracy – ±3% Adapter Current Accuracy – ±2% Input Current Sense Amp Accuracy Integration – Automatic System Power Selection From AC/DC Adapter or Battery – Internal Loop Compensation – Internal Soft Start Safety – Input Overvoltage Protection (OVP) – Dynamic Power Management (DPM) with Status Indicator – Programmable Inrush Adapter Power (ACOP) and Overcurrent (ACOC) Limits – Reverse-Conduction Protection Input FET – Battery Thermistor Sense Input (TS) for Charge Qualification Supports Two, Three, or Four Li+ Cells 5–24 V AC/DC-Adapter Operating Range Analog Inputs with Ratiometric Programming via Resistors or DAC/GPIO Host Control – Charge Voltage (4–4.512 V/cell) – Charge Current (up to 10 A, with 10-mΩ Sense Resistor) – Adapter Current Limit (DPM) Status and Monitoring Outputs – AC/DC Adapter Present with Programmable Voltage Threshold – DPM Loop Active – Current Drawn from Input So...