Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
bq29200, bq29209
SLUSA52C – SE...
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
bq29200, bq29209
SLUSA52C – SEPTEMBER 2010 – REVISED MARCH 2016
bq2920x
Voltage Protection with Automatic Cell Balance for 2-Series Cell Li-Ion Batteries
1 Features
1 2-Series Cell Secondary Protection Automatic Cell Imbalance Correction with External
Enable Control – ±30-mV Enable, 0-mV Disable Thresholds
Typical External Capacitor-Controlled Delay Timer External Resistor-Controlled Cell Balance Current Low Power Consumption ICC < 3 µA Typical
(VCELL(ALL) < VPROTECT) Internal Cell Balancing Handles Current
up to 15 mA External Cell Balancing Mode Supported High-Accuracy Over
voltage Protection:
– ±25 mV with TA = 0°C to 60°C Fixed Over
voltage Protection Thresholds:
4.30 V, 4.35 V Small 8L DRB Package
2 Applications
2nd Level Protection in Li-Ion Battery Packs – Netbook Computers – Power Tools – Portable Equipment and Instrumentation – Battery Backup Systems
3 Description
The bq2920x device is a secondary over
voltage protection IC for 2-series cell lithium-ion battery packs that incorporates a high-accuracy precision over
voltage detection circuit and automatic cell imbalance correction.
The
voltage of each cell in a 2-series cell battery pack is compared to a factory programmed internal reference
voltage. If either cell reaches an over
voltage condition, the OUT pin changes from low to high state.
The bq2920x can perform automatic
voltage-based cell imbalance correct...