Indoor Air Quality Sensor Module
iAQ-Core
Indoor Air Quality Sensor Module
General Description
The iAQ-Core sensor module is used to measure VOC levels...
Description
iAQ-Core
Indoor Air Quality Sensor Module
General Description
The iAQ-Core sensor module is used to measure VOC levels and provide CO2 equivalent and TVOC equivalent predictions. The data is available via I²C bus.
The sensor itself is protected by a plastic cap and a filter membrane. The sensor module can be soldered directly to a host circuit board with selective or reflow soldering via the edge connectors. The sensor is protected by a membrane, which should not be removed.
Note(s): Please read the I²C addressing instructions carefully. An undefined use of the I²C interface could harm the iAQ-Core module and cause a loss of functionality.
Ordering Information and Content Guide appear at end of datasheet.
Key Benefits & Features
The benefits and features of iAQ-Core, Indoor Air Quality sensor module are listed below:
Figure 1: Added Value of Using iAQ-Core Sensor Module
Benefits
Reliable evaluation of indoor air quality
High sensitivity and fast response
Micro size for convenient installation
Low power consumption
Features
Output of relative CO2 equivalents (ppm) and TVOC equivalents (ppb)
Sensing range: 450 – 2000 ppm CO2 equivalents 125 – 600 ppb TVOC equivalents
I²C interface
MEMS metal oxide sensor technology SMD type package Reflow capable Module with automatic baseline correction
66 mW (maximum in continuous mode) 9 mW (maximum in pulsed mode)
Applications
Smart Home Internet of Things HVAC Thermostats
ams Datasheet [v1-00] 2015-...
Similar Datasheet