iW3630
AC/DC Digital Power Controller for High Power Factor Analog and 0-10V Dimmable LED Drivers
1.0 Features
●● Isola...
iW3630
AC/DC Digital Power Controller for High Power Factor Analog and 0-10V Dimmable LED Drivers
1.0 Features
●● Isolated/non-isolated offline 100VAC/277VAC LED driver controller
●● Meets IEC61000-3-2 requirements
●● Total harmonic distortion < 15% with Power Factor > 0.95
●● Analog input dimming level control
●● Built-in 0-10V isolation transformer driver
●● Under 10% output ripple current
●● Wide dimming range from 1% to 100%
●● FlickerlessTM LED dimming technology
●● Quasi-resonant control to achieve high efficiency (typical > 85%)
●● Small size xx Two-stage topology enables small-size input and output filter
capacitors xx 200kHz maximum switching frequency enables small transformer
●● Primary-side sensing eliminates the need for opto-isolator feedback
●● Tight LED current regulation
●● Supports wide LED output
voltage range
●● Multiple protection features: xx LED open-circuit and short-circuit protection xx Over-current protection xx Current sense resistor short-circuit protection xx AC line over-
voltage/frequency protection
2.0 Description
The iW3630 is a two-stage, high-performance AC/DC offline power supply controller for dimmable LED luminaires with analog dimming interface. It controls LED current based on analog input
voltage on the dimming pin. It also has a built-in 0-10V isolation transformer driver which can work directly with 0-10V dimming system without adding extra driver circuit and micro-controller. The iW3630 uses iWatt’s unique digital FlickerlessTM te...