Part Number | NCP372 |
Manufacturer | ON Semiconductor (https://www.onsemi.com/) |
Title | Positive and Negative Overvoltage Protection Controller |
Description | Pin Name Type Description 1, 2 IN POWER Input voltage pins. These pins are connected to the power supply. A 1 mF low ESR ceramic capacitor, or... |
Features |
• Overvoltage Protection up to 28 V • Negative Voltage Protection down to −28 V • Reverse Current Blocking • On−Chip Low RDS(on) NMOS Transistor: Typical 130 mW • Overvoltage Lockout (OVLO) • Undervoltage Lockout (UVLO) • Soft−Start • Alert FLAG Output • Shutdown EN Input • Compliance to IEC61000−4−... |
Datasheet | NCP372 pdf datasheet - 224.64KB |
Part Number | NCP374 |
Manufacturer | ON Semiconductor |
Title | Overvoltage and over-current protection |
Description | Pin 1, 2 Pin Name VBUS Type POWER Description VBUS voltage pins: must be hardwired together on the PCB. These pins are connected to the VBUS conne. |
Features |
http://onsemi.com MARKING DIAGRAM
1
TLLGA12 CASE 513AP
XXXXXX XXXXXX ALYWG G
A = Assembly Location L = Wafer Lot Y = Year W = Work Week G = Pb−Free Package (Note: Microdot may be in either location)
• • • • • • • • • • • • • • • Adjustable Over−Current Over−voltage Protection Up to 28 V and Dow. |
Datasheet | NCP374 pdf datasheet |
Part Number | NCP373 |
Manufacturer | ON Semiconductor |
Title | Over-Voltage and Over-Current protection device |
Description | Pin Pin Name Type 1,2 VBUS POWER 3 GND POWER 4 RES1 INPUT 5 RES2 INPUT 6 RES3 INPUT 7 Ilim OUTPUT Description VBUS voltage pins: must b. |
Features |
• Adjustable Over−current • Over−voltage Protection Up to 28 V and Down to −28 V • Logic pins EN and DIR • Thermal Shutdown • On−chip low RDS(on) NMOS Transistors • Over−voltage Lockout (OVLO) • Soft−start • Real Shutdown Mode • Alert FLAG Output • Compliance to IEC61000−4−2 (Level 4) 8 kV (Contact). |
Datasheet | NCP373 pdf datasheet |
Part Number | NCP3712ASN |
Manufacturer | ON Semiconductor |
Title | Over Voltage Protected High Side Switch |
Description | NCP3712ASN, SZNCP3712ASN Over Voltage Protected High Side Switch This switch is primarily intended to protect loads from transients by isolating . |
Features |
• Capable of Switching Loads of up to 200 mA without External Rboost • Switch Shuts Off in Response to an Over Voltage Input Transient • Features Active Turn Off for Fast Input Transient Protection • Flexible Over Voltage Protection Threshold Set with External Zener • Automatic Recovery after Transi. |
Datasheet | NCP3712ASN pdf datasheet |
Part Number | NCP370 |
Manufacturer | ON Semiconductor |
Title | Positive and Negative Overvoltage Protection |
Description | Pin Name Type Description 1, 2 IN POWER Input voltage pins. These pins are connected to the power supply. A 1 mF low ESR ceramic capacitor, or. |
Features |
• Overvoltage Protection Up to 28 V • Negative Voltage Protection Down to −28 V • Reverse Charge Control: REV • Direct Charge Control: DIR • Overcurrent Protection • Thermal Shutdown • On−chip Low RDS(on) NMOS Transistors: Typical 130 mW • Overvoltage Lockout (OVLO) • Undervoltage Lockout (UVLO) • S. |
Datasheet | NCP370 pdf datasheet |
Since 2024. D4U Semiconductor. | Contact Us | Privacy Policy