DC-DC Converter
DC-DC
2 Watts IST Series
xppower.com
• Single Output • SMD Package • Industry Standard Pinout • 1000 VDC Isolation • M...
Description
DC-DC
2 Watts IST Series
xppower.com
Single Output SMD Package Industry Standard Pinout 1000 VDC Isolation MTBF >3.5 MHrs -40 °C to +85 °C Operation 3 Year Warranty
Specification Input
Input Voltage Output Voltage Output Current Efficiency (typ) Model Number(1)
Input Voltage Range
Input Reverse Voltage Protection
Nominal ±10% None
5 VDC 24 VDC
15.0 V 5.0 V 12.0 V
133 mA 400 mA 167 mA
79% 78% 80%
IST0515A IST2405A†^ IST2412A†^
Output
Output Voltage
See table
Minimum Load
10%(2)
Line Regulation
1.2%/1% Δ Vin
Load Regulation
7.5% max for a 10-100% load change
Setpoint Accuracy
100-110% of nominal at 10% load
Ripple & Noise
200 mV pk-pk 20 MHz bandwidth
Temperature Coefficient 0.03%/°C
General
Efficiency Isolation Voltage Isolation Resistance Switching Frequency MTBF
See table 1000 VDC 109 Ω 500 kHz typical at nominal input, full load >3.5 MHrs to MIL-HDBK-217F at 25 °C, GB
Notes
1. For alternative pin out, add suffix ‘-X’ to end of part number eg. IST2415A-X. 2. Operation at no load will not damage device but may not meet all specifications.
0.441 (11.20) 0.295 (7.50)
0.246 (6.25) 0.236 (6.00)
0.163 (4.13)
Mechanical Details
Side View
0.100 (2.54)
0.010 (0.25)
0.500 (12.70)
0.300 (7.62)
Top View
0.073 (1.85)
0.266 (6.76)
0.28 (7.19)
A
0.012 (0.30)
0.05 (1.35)
0.02 (0.50)
5º
Environmental
Operating Temperature -40 °C to +85 °C
Storage Temperature -55 °C to +125 °C
Case Temperature
105 °C...
Similar Datasheet