DatasheetsPDF.com

MBRF1045 Dataheets PDF



Part Number MBRF1045
Manufacturers Vishay
Logo Vishay
Description Schottky Barrier Rectifier
Datasheet MBRF1045 DatasheetMBRF1045 Datasheet (PDF)

www.vishay.com MBR10xx, MBRF10xx, MBRB10xx Vishay General Semiconductor Schottky Barrier Rectifier TO-220AC ITO-220AC MBR1045 MBR1060 PIN 1 PIN 2 2 1 MBRF1045 MBRF1060 PIN 1 CASE PIN 2 D2PAK (TO-263AB) K 2 1 2 1 MBRB1045 MBRB1060 PIN 1 K PIN 2 HEATSINK LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. Package 10 A 45 V, 60 V 150 A 0.57 V, 0.70 V 150 °C TO-220AC, ITO-220AC, D2PAK (TO-263AB) Circuit configuration Single F.

  MBRF1045   MBRF1045


Document
www.vishay.com MBR10xx, MBRF10xx, MBRB10xx Vishay General Semiconductor Schottky Barrier Rectifier TO-220AC ITO-220AC MBR1045 MBR1060 PIN 1 PIN 2 2 1 MBRF1045 MBRF1060 PIN 1 CASE PIN 2 D2PAK (TO-263AB) K 2 1 2 1 MBRB1045 MBRB1060 PIN 1 K PIN 2 HEATSINK LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. Package 10 A 45 V, 60 V 150 A 0.57 V, 0.70 V 150 °C TO-220AC, ITO-220AC, D2PAK (TO-263AB) Circuit configuration Single FEATURES • Power pack • Low power loss, high efficiency • Low forward voltage drop • High forward surge capability • High frequency operation • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder bath temperature 275 °C maximum, 10 s, per JESD 22-B106 (for TO-220AC and ITO-220AC package) • AEC-Q101 qualified available (for ITO-220AC and D2PAK (TO-263AB) package) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters, and polarity protection application. MECHANICAL DATA Case: TO-220AC, ITO-220AC, D2PAK (TO-263AB) TO-220AC Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade ITO-220AC Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified (“_X” denotes revision code, e.g. A, B, ...) D2PAK (TO-263AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - RoHS-compliant, halogen-free, commercial grade Base P/NHM3 - RoHS-compliant, halogen-free, AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 and M3 suffix meets JESD 201 class 1A whisker test, HE3 and HM3 suffix meets JESD 201 class 2 whisker test Polarity: as marked Mounting Torque: 10 in-lbs maximum Revision: 21-Aug-2023 1 Document Number: 88669 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com MBR10xx, MBRF10xx, MBRB10xx Vishay General Semiconductor MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Peak repetitive reverse current at tp = 2.0 μs, 1 kHz Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min SYMBOL VRRM IF(AV) IFSM IRRM dV/dt TJ TSTG VAC MBR1045 MBR1060 45 60 10 150 1.0 0.5 10 000 -65 to +150 -65 to +175 1500 UNIT V A A V/μs °C V ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MBR1045 MBR1060 Maximum instantaneous forward voltage VF (1) Maximum instantaneous reverse current at DC blocking voltage IR (2) IF = 10 A IF = 10 A IF = 20 A IF = 20 A Rated VR TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C - 0.80 0.57 0.70 0.84 0.95 0.72 0.85 0.10 15 Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR Typical thermal resistance from junction to case RθJC 2.0 MBRF 4.0 MBRB 2.0 UNIT V mA UNIT °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE TO-220AC MBR1045-E3/45 1.80 45 ITO-220AC MBRF1045-E3/45 1.94 45 TO-263AB MBRB1045-M3/P 1.33 P TO-263AB MBRB1045-M3/I 1.33 I ITO-220AC MBRF1045HE3_A/P (1) 1.94 P TO-263AB MBRB1045HM3/P (1) 1.33 P TO-263AB MBRB1045HM3/I (1) 1.33 I Note (1) AEC-Q101 qualified, available in ITO-220AC and D2PAK (TO-263AB) package BASE QUANTITY 50/tube 50/tube 50/tube 800/reel 50/tube 50/tube 800/reel DELIVERY MODE Tube Tube Tube Tape and reel Tube Tube Tape and reel Revision: 21-Aug-2023 2 Document Number: 88669 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com MBR10xx, MBRF10xx, MBRB10xx Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Average Forward Current (A) 12 Resistive or Inductive Load 10 8 6 4 2 MBR1045 MBR1060 0 0 50 100 150 Case Temperature (°C) Fig. 1 - Forward Current Derating Curve Instantenous Reverse Curren.


MBRF1035 MBRF1045 MBRF1050


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)