Thick Film/ Resistor Array
CRA04S
Vishay Dale
Thick Film, Resistor Array
FEATURES
• Convex terminal array with square corners • 4 or 8 terminal pa...
Description
CRA04S
Vishay Dale
Thick Film, Resistor Array
FEATURES
Convex terminal array with square corners 4 or 8 terminal package with isolated resistors Single component reduces board space and component counts Automatic placement capability Wave and solder paste reflow compatible Thick film resistance element Solderable wrap around termination Nickel barrier for inner electrode protection Standard E-24 resistance values Operating temperature range of - 55°C to + 150°C Consult factory for additional schematics, values, etc
STANDARD ELECTRICAL SPECIFICATIONS
MODEL POWER RATING CIRCUIT P70°C W 0.063 03 LIMITING ELEMENT VOLTAGE MAX. VƆ 50 TEMPERATURE TOLERANCE COEFFICIENT ppm/°C % 200 100 5 2 RESISTANCE RANGE E-SERIES
Ω
CRA04S
1R0 – 1M0 10R – 1M0
24 24
Jumper: Zero-Ohm-Resistor on request Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material Ask about extended value ranges. Packaging: according to EIA 481 Contact factory for tighter tolerance.
TECHNICAL SPECIFICATIONS
PARAMETER Rated Dissipation at 70°C Limiting Element Voltage Insulation Voltage (1min) Category Temperature Range Insulation Resistance
1) 1)
UNIT W VƆ Vdc/ac peak °C Ω
CRA04S 0.063 50 100 - 55 / + 150 > 10
9
Rated voltage:
PxR
ORDERING INFORMATION
CRA04S MODEL 08 TERMINAL COUNT 04, 08 03 CIRCUIT TYPE 03 only 473 RESISTANCE VALUE Ω J TOLERANCE ±% RT7 PACKAGING Paper tape 10000pcs
First two digits (three for 1%...
Similar Datasheet