Document
FNF50560TD1 Motion SPM® 55 Series
FNF50560TD1
Motion SPM® 55 Series
October 2015
Features
• UL Certified No. E209204 (UL1557)
• 600 V - 5 A 3-Phase IGBT Inverter Including Control IC for Gate Drive and Protections
• Low-Loss, Short-Circuit Rated IGBTs
• Built-In Bootstrap Diodes in HVIC
• Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
• Active-HIGH interface, works with 3.3 / 5 V Logic, Schmitt-trigger Input
• HVIC for Gate Driving, Under-Voltage and Short-Circuit Current Protection
• Fault Output for Under-Voltage and Short-Circuit Current Protection
• Inter-Lock Function to Prevent Short-Circuit
• Shut-Down Input
• HVIC Temperature-Sensing Built-In for Temperature Monitoring
• Optimized for 15 - 20 kHz Switching Frequency
• Isolation Rating: 1500 Vrms / min.
General Description
FNF50560TD1 is a Motion SPM 55 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, inter-lock function, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's robust shortcircuit-rated IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.
Applications
• Motion Control - Home Appliance / Industrial Motor
Related Resources
• AN-9096 - Smart Power Module, Motion SPM® 55 Series User’s Guide
• AN-9097 - SPM® 55 Packing Mounting Guidance
Figure 1. 3D Package Drawing (Click to Activate 3D Content)
Package Marking and Ordering Information
Device FNF50560TD1
Device Marking FNF50560TD1
Package SPMFA-A20
Packing Type RAIL
Quantity 13
©2015 Fairchild Semiconductor Corporation
FNF50560TD1 Rev. 1.0
1
www.fairchildsemi.com
FNF50560TD1 Motion SPM® 55 Series
Integrated Power Functions
• 600 V - 5 A IGBT inverter for three phase DC / AC power conversion (Please refer to Figure 3)
Integrated Drive, Protection and System Control Functions
• For inverter high-side IGBTs: gate drive circuit, high-voltage isolated high-speed level shifting control circuit Under-Voltage Lock-Out (UVLO) protection
• For inverter low-side IGBTs: gate drive circuit, Short-Circuit Protection (SCP) control supply circuit Under-Voltage Lock-Out (UVLO) protection
• Fault signaling: corresponding to UVLO (low-side supply) and SC faults • Input interface: High-active interface, works with 3.3 / 5 V logic, Schmitt trigger input • Built in Bootstrap circuitry in HVIC
Pin Configuration
Figure 2. Top View
©2015 Fairchild Semiconductor Corporation
FNF50560TD1 Rev. 1.0
2
www.fairchildsemi.com
FNF50560TD1 Motion SPM® 55 Series
Pin De.