FNF51060TD1

FNF51060TD1 Motion SPM® 55 Series FNF51060TD1 Motion SPM® 55 Series September 2015 Features UL Certified No. E209204 (UL1557) 600 V - 10 A 3-Phase IGBT Inverter Including Control IC for Gate Drive and Protections Low-Loss, Short-Circuit Rated IGBTs Built-In Bootstrap Diodes in HVIC Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing Active-HIGH interface, works with 3.3 / 5 V Logic, Schmitt-trigger Input HVIC for Gate Driving, Under-Voltage and Short-Circuit Current Protection Fault Output for Under-Voltage and Short-Circuit Current Protection Inter-Lock Function to Prevent Short-Circuit Shut-Down Input HVIC Temperature-Sensing Built-In for Temperature Monitoring Optimized for 15 - 20 kHz Switching Frequency Isolation Rating: 1500 Vrms / min. General Description FNF51060TD1 is a Motion SPM 55 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, inter-lock function, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's robust shortcircuit-rated IGBT...