Digital Attenuator
MAAD-009195
Constant Phase Digital Attenuator 15.5 dB, 5-Bit, TTL Driver, DC - 3.0 GHz
Features
Attenuation: 0.5 dB st...
Description
MAAD-009195
Constant Phase Digital Attenuator 15.5 dB, 5-Bit, TTL Driver, DC - 3.0 GHz
Features
Attenuation: 0.5 dB steps to 15.5 dB Minimal Phase Variation over Attenuation Range Low DC Power Consumption Hermetic Surface Mount Package Integral TTL Driver 50 Ohm Nominal Impedance 260°C Reflow Compatible RoHS* Compliant
Description
MACOM’s MAAD-009195-000100 is a GaAs FET 5-bit digital attenuator with a 0.5 dB minimum step size and 15.5 dB total attenuation. The design has been optimized to minimize phase variation over the attenuation range. This attenuator and integral TTL driver is in a hermetically sealed ceramic 16-lead surface mount package. The MAAD-009195-000100 is ideally suited for use where accuracy, fast switching, very low power consumption and low intermodulation products are required. Typical applications include dynamic range setting in precision receiver circuits and other gain / leveling control circuits. Environmental screening is available. Contact the factory for information.
Ordering Information
Part Number
Package
MAAD-009195-000100
Bulk Packaging
MAAD-009195-0001TB
Sample Test Board
Note: Reference Application Note M513 for reel size information.
Functional Schematic
Rev. V2
Pin Configuration 1
Pin No. 1 2 3 4 5
Function RF1 GND GND GND GND
Pin No. 9 10 11 12 13
Function C5 +5V -5V C4 C3
6 GND 14
C2
7 GND 15
C1
8 RF2 16 GND
1. The metal bottom of the case must be connected to RF and DC ground.
* Restrictions on Haza...
Similar Datasheet