XC9259 Series is Not Recommended for New Designs.
XC9259 Series
ETR05041-003
COT Control, 1.0A Synchronous Step-Down D...
XC9259 Series is Not Recommended for New Designs.
XC9259 Series
ETR05041-003
COT Control, 1.0A Synchronous Step-Down DC/DC Converters
■GENERAL DESCRIPTION
☆GreenOperation-compatible
The XC9259 series is a group of synchronous-rectification type DC/DC converters with a built-in P-channel MOS driver
transistor
and N-channel MOS switching
transistor, designed to allow the use of ceramic capacitors. Output voltage is internally set in a
range from 0.8V to 3.6V (accuracy: ±2.0%) increments of 0.05V. The device provides a high efficiency, stable power supply with
an output current of 1.0A to be configured using only a coil and two capacitors connected externally. Oscillation frequency is set to
1.2MHz or 6.0MHz can be selected for suiting to your particular application. The operation mode is HISAT-COT (*) control, which has an excellent transient response. PWM control or PWM/PFM auto
switching control can be selected at the MODE pin, and a high-speed response, low ripple, and high efficiency are achieved across
the entire load range (from light loads to heavy loads).
During stand-by, all circuits are shutdown to reduce current consumption to as low as 1.0μA or less. As for the soft-start function
as fast as 0.3ms in typical for quick turn-on. With the built-in UVLO (Under Voltage Lock Out) function, the internal P-channel MOS
driver
transistor is forced OFF when input voltage becomes 2.00V or lower. The B types integrate CL High Speed discharge function
which enables...