Digital Controlled Variable Gain Amplifier
Digital Controlled Variable Gain Amplifier
50Ω 0.45 to 2.4 GHz 31.5 dB, 0.5 dB Step, 6 Bit Parallel Control
The Big Deal...
Description
Digital Controlled Variable Gain Amplifier
50Ω 0.45 to 2.4 GHz 31.5 dB, 0.5 dB Step, 6 Bit Parallel Control
The Big Deal
Integrated Amplifier and Digital Attenuator 30 dB Gain / 31.5 dB Gain Control High Output IP3, 34-37 dBm
DVGA1-242PP+
CASE STYLE: DG1677
Product Overview
The DVGA1-242PP+ is a 50Ω RF Digital Variable Gain Amplifier that offers an attenuation of 31.5 dB in 0.5 dB steps using a 6-bit parallel interface attenuator and 30dB gain using a E-PHEMT amplifier. Step attenuator used in DVGA1-242PP+ is produced using a unique combination of CMOS process on silicon, offering the performance of GaAs, with the advantages of conventional CMOS devices.
Key Features
Feature
31.5 dB attenuation in 0.5 dB step size
High Gain, 30 dB
High IP3, +34 dBm at 1.0 GHz Low Noise Figure, 2.5 dB at 1.0 GHz
Output Power, +23 dBm at 2.4 GHz
MCLP Package Max Input Power, +24 dBm Attenuation Step size, 0.5 dB, accuracy 0.1 dB typ. Total attenuation, 31.5 dB External Jumper
Advantages Combining high gain and a wide range of gain control makes the DVGA1-242PP+ an ideal building block for any RF chain where level setting control is required in fast speed of parallel control interface.
Incorporating multiple stages of amplification, the DVGA1-242PP+ provides high gain reducing cost and PCB board space
Combining Low Noise and High IP3 makes this MMIC amplifier ideal for Low Noise Receiver Front End (RFE) giving the user advantages at both ends of the dynamic range: sensitivity & two-ton...
Similar Datasheet