DatasheetsPDF.com

SM180 Dataheets PDF



Part Number SM180
Manufacturers MIC
Logo MIC
Description SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Datasheet SM180 DatasheetSM180 Datasheet (PDF)

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SM6.8 THRU SM200CA Breakdown Voltage Peak Pulse Power 6.8 to 200 Volts 400 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Glass passivated junction • Low inductance surge resistance • Fast response time: typical less than 1.0ps from 0 volts to V(BR) for unidirectional AND 5.0ns for bidirectional types • 400W peak pulse capability with a 10/1000μs waveform, repetitio.

  SM180   SM180


Document
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SM6.8 THRU SM200CA Breakdown Voltage Peak Pulse Power 6.8 to 200 Volts 400 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Glass passivated junction • Low inductance surge resistance • Fast response time: typical less than 1.0ps from 0 volts to V(BR) for unidirectional AND 5.0ns for bidirectional types • 400W peak pulse capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% • For devices with V(BR) ≥10V, ID are typically less than 1.0μA • High temperature soldering guaranteed: 250℃/10 seconds at terminals DO-213AB Dimensions in inches and (millimeters) MECHANICAL DATA • Cass: JEDEC DO-213AB,molded plastic body over passivated junction • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: Blue bands denotes positive end (cathode) for unidirectional and yellow band in the Middle for bidirectional types • Mounting position: any • Weight: 0.116 ounces, 0.0064 gram DEVICES FOR BIDRECTIONAL APPLICATIONS • For bidirectional applications use suffix letters C or CA for types SM6.8 thru SM200A (e.g. SM6.8C, SM200CA).Electrical Characteristics apply in both directions. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Ratings Symbols Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,FIG.1) Steady Stage Power Dissipation at TT=75℃(Note2) Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load for unidirectional only (JEDEC Method) (Note3) Maximum instantaneous forward voltage at 25A (NOTE 3) for unidirectional only Operating Junction and Storage Temperature Range PPPM PM(AV) IPPM IFSM VF TJ, TSTG Value Minimum 400 1.0 See Table 1 40.0 3.5 50 to +150 Unit Watts Watt Amps Amps Volts ℃ Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2 2. Mounted on copper pads to each terminal of 0.31 in (8.0mm2) per Fig 5. 3. Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minutes maximum. E-mail: [email protected] Web Site: www.cnmic.com SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SM6.8 THRU SM200CA Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE1 Test Maximum Breakdown Voltage Current Stand-off Reverse Device Type V(BR)(Volts) (Note 1) MIN MAX at IT (mA) Voltage VWM (Volts) Leakage at VWM ID (μA) SM6.8 6.12 7.48 10 5.5 1000 SM6.8A 6.45 7.14 10 5.8 1000 SM7.5 6.75 8.25 10 6.05 500 SM7.5A 7.13 7.88 10 6.4 500 SM8.2 7.38 9.02 10 6.63 200 SM8.2A 7.79 8.61 10 7.02 200 SM9.1 8.19 10 1 7.37 50 SM9.1A 7.65 9.55 1 7.78 50 SM10 9 11 1 8.1 10 SM10A 9.5 10.5 1 8.55 10 SM11 9.9 12.1 1 8.92 5 SM11A 10.5 11.6 1 9.4 5 SM12 10.8 13.2 1 9372 5 SM12A 11.4 12.6 1 10.2 5 SM13 11.7 14.3 1 10.5 5 SM13A 12.4 13.7 1 11.1 5 SM15 13.5 16.5 1 12.1 5 SM15A 14.3 15.8 1 12.8 5 SM16 14.4 17.6 1 12.9 5 SM16A 15.2 16.8 1 13.6 5 SM18 16.2 19.8 1 14.5 5 SM18A 17.1 18.9 1 15.3 5 SM20 18 22 1 16.2 5 SM20A 19 21 1 17.1 5 SM22 19.8 24.2 1 17.8 5 SM22A 20.9 23.1 1 18.8 5 SM24 21.6 26.4 1 19.4 5 SM24A 22.8 25.2 1 20.5 5 SM27 24.3 29.7 1 21.8 5 SM27A 25.7 28.4 1 23.1 5 SM30 27 33 1 24.3 5 SM30A 28.5 31.5 1 25.6 5 SM33 29.7 36.3 1 26.8 5 SM33A 31.4 34.7 1 28.2 5 SM36 32.4 39.6 1 29.1 5 SM36A 34.2 37.8 1 30.8 5 SM39 35.1 42.9 1 31.6 5 SM39A 37.1 41 1 33.3 5 SM43 38.7 47.3 1 34.8 5 SM43A 40.9 45.2 1 36.8 5 SM47 42.3 51.7 1 38.1 5 SM47A 44.7 49.4 1 40.2 5 SM51 45.7 56.1 1 41.3 5 SM51A 48.5 43.6 1 43.6 5 SM56 50.4 61.6 1 45.4 5 SM56A 53.2 58.8 1 47.8 5 SM62 55.8 68.2 1 50.2 5 SM62A 58.9 65.1 1 53 5 Breakdown Voltage Peak Pulse Power 6.8 to 200 Volts 400 Watts Maximum Peak Pulse Current IPPM (Note 2) (Amps) 37 38.1 34.2 35.4 32 33.1 29 29.9 26.7 27.6 24.7 25.6 23.1 24 21.1 22 18.2 18.9 17 17.8 15.1 15.9 13.7 14.4 12.5 13.1 11.5 12 10.2 10.7 92 9.7 8.4 8.8 7.7 8 7.1 7.4 6.5 6.7 5.9 6.2 5.4 5.7 5 5.2 4.5 4.7 Maximum Clamping Voltage at IPPM VC(Volts) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15 14.5 16.2 15.6 17.3 16.7 19 18.2 22 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77 89 85 Maximum Temperature Coefficient of V(BR) (%/℃) 0.06 0.06 0.064 0.064 0.068 0.068 0.071 0.071 0.076 0.076 0.078 0.078 0.081 0.081 0.084 0.084 0.087 0.087 0.089 0.089 0.091 0.091 0.093 0.093 0.095 0.095 0.097 0.097 0.099 0.099 0.1 0.1 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 SM6.8 THRU SM200CA E-mail: [email protected] Breakdown Voltage 6.8 to 200 Volts Web Site: www.cnmic.com SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Peak Pulse Power Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE.


SM170A SM180 SM180A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)